Slag Cleaning Agent

Slag cleaning agent RH-QZ

During the smelting process of aluminum and aluminum alloys, impurities brought by the furnace and charge. (Especially when there are more materials in the furnace) and impurities such as oxides generated by inhalation during the melting process. After refining, the impurity drum refining gas is brought to the molten channel formed on the surface of the molten aluminum under the physical or chemical action of the refining agent. These molten slags contain more or less aluminum. If they are cleaned out of the furnace, it is bound to be treated. Cause the loss of aluminum. So choose a kind of heat. The slag performance is good. Fast-response incubation

Treatment in the furnace in order to achieve the effect of clear aluminum separation.

It is the slag treated by the aluminum separation agent designed for this purpose. The teeth became quite dry and loose. There is little aluminum mixed in the slag, thereby reducing the loss of aluminum and improving the purity of the molten aluminum. In addition. The cleaning agent also has a good national cover. Protective effect, can replace covering agent.

◆ Technical parameters

● Model: RH-QZ

● Shape: white powder. The particle size is less than 20 days, and the moisture content is less than 0.5%.

● Scope of application: other aluminum and aluminum alloys except high-boiler alloys.

● Reference dosage: add in at 0.1-0. 2% of the weight of the aluminum melt, depending on the furnace type and the purity of the charge.

◆ How to use

Before or after refining, the cleaning agent is evenly heavier than the surface of the steel melt. At this time, due to the reaction of the cleaning agent, a lot of heat is released, which makes the cleaning process hot and red. Mix the molten slag in time, and remove the powder after the molten slag becomes broken powder. For example, the slag cleaning agent is used as a cover. Into the furnace three times. One time is added when the charge starts to melt, the second time is added after it is completely melted, and the third time is mainly used to separate the slag and aluminum, which should be coated on the surface of the slag after refining. The specific amount can be adjusted according to the reference dosage.

◆ Main advantages

It has good heat generation, separates the aluminum in the slag, and decomposes into alumina. Make aluminum slag dry and loose, easy to remove.

The formation of a fluid, dense protective layer plays a covering role to prevent secondary air inhalation and oxidation of the aluminum liquid.

Reduce the quality of sticks attached to the furnace wall and furnace bottom. Avoid damage to the protective body, prolong the service life of the furnace body and reduce the number of furnace cleanings.

Can be used as a furnace cleaning agent.

◆ Packaging and storage

Corrugated carton packaging: 20-25 kg per carton.

Keep it in the country and keep it away from moisture.